TURBINE METERS / QUANTOMETERS
Turbine meters and Quantometers are flow meters which display the volume flowing through the device in actual cubic meters. The incoming gas is accelerated through the inlet body and strikes the blades of the turbine wheel. The revolutions of the turbine wheel are transferred to an 8-digit roller counter via a multi-stage gear and a magnetic coupling. Turbine meter are used for official metering and billing purpose (custody transfer). Quantometers are short-pattern turbine meters with a length of 1.5 x DN. From a metering point of view and in terms of material, both types of meters are suitable for use with combustible gases in the field of energy supply as well as with a variety of technical gases in industrial applications. All turbine meters have an EU approval and are registered with the DVGW. 

TRZ Turbine Meters

Main Features TRZ/TRZ-IFS

Turbine gas meter with measuring cartridges

Meters types G 65 - G 16000

Flow range 5 - 25000 m3/h

Diameters DN 50 - DN 600

Pressure rates PN 10 - 100 and ANSI 150 - 600

Length 3 DN

Thermwell built into meter housing (optional)

PTB and international approval

Measuring Media: natural gas, petroleum gas, city gas, butane, ethylene, air, nitrogen

Main Features TRZ-IFS

Compact installation, inlet pipe length L > 2 DN without additional flow straightener

Integrated flow straightener

DN 80 - DN 400 (DN500 - 600 on request)


Q Quantometers

Main Features

Low cost gas flow meter

Meters sizes Q 65 - Q 16000

Flow Ranges 6 - 25000 m3/h

Rangeability up to 1:20, for higher pressure up to 1:100

Nominal width DN 50 - DN 500

Pressure rates up to 100 bar

Flange connections according to DIN or ANSI

Length 1.5 DN

Housing made of spheroidal grahite cast iron, cast steel or welded steel

Suitable for outdoor installation (IP 67)

Two low frequency pulsers standard

Approved by Germany DVGW

Media: natural gas, methane, oxygen, city gas, non-aggressive gases.


QA and QAe Quantometers

Main Features

Compact gas meter

Meters sizes QA/e 10 - QA/e 1000

Flow Ranges 1.6 - 1600 m3/h

Measuring range up to 160% of maximum flow rate

Safe load up to 160% of maximum flow rate

Nominal width DN 25 - DN 150

Aluminium housing

QA: protection class IP52, 7-digit mechanical totalizer

QAe: protection class IP44, 6-digit LCD display


< Back to Products Main Page >


Copyright © 2004 JAYAGAS GROUP, All Rights Reserved.

Designed & Maintained by